Enable H.323

To use GDS in your environment, you must have H.323 enabled and registered on your RealPresence Centro system.

Procedure

  1. In the system web interface, go to Admin Settings > Network > IP Network > H.323 Settings and select the checkbox at Enable IP H.323.
  2. Enter the required registration information as follows.

    Setting

    Description

    Enable IP H.323

    Allows the H.323 settings to be displayed and configured.

    H.323 Name

    Specifies the name that gatekeepers and gateways use to identify this system. You can make point-to-point calls using H.323 names if both systems are registered to a gatekeeper.

    The H.323 Name is the same as the System Name, unless you change it. Your organization's dial plan might define the names you can use.

    H.323 Extension (E.164)

    Lets users place point-to-point calls using the extension if both systems are registered with a gatekeeper, and specifies the extension that gatekeepers and gateways use to identify this system.

    Your organization's dial plan might define the extensions you can use.

    Use Gatekeeper

    Turn the gatekeeper off or make it automatic.

    Require Authentication

    Require authentication for IP H.323 connections.

    Current Gatekeeper IP Address

    The IP address for the current gatekeeper.

    Primary Gatekeeper IP Address

    The IP address for the primary gatekeeper.