Current Publication | x
Close

Polycom ® RealPresence ® DMA ®  System Edge to Core Integration

A Polycom ® RealPresence ® DMA ®  edge system can be configured to integrate with a RealPresence DMA core system. It’s recommended that you run the DMA Edge Wizard to configure the edge system automatically but you can also configure it manually.

After you initially set up a RealPresence DMA edge system and core system on your network, you can use the DMA Edge Wizard to create all the necessary connections for the edge system and core system to communicate. You should not use the wizard if you deploy a combination-configured system or upgrade a Polycom RealPresence Access Director system to a RealPresence DMA system.

To use the DMA Edge Wizard to configure two edge systems in VPN tunnel mode, see Run the RealPresence DMA Edge Wizard on Both VPN Tunnel Systems .

Related Topics

Machine Translation

You are cautioned that the translation of this document is generated by a machine; therefore, the translated document may have errors and be inconsistent with the original English language version of the document.

The English language version of this document shall be considered the governing document related to the Polycom product.

If there is any contradiction between the English language version of the document and the translated version of the document, the English language version of the document shall take precedence.

The translation is provided for your convenience only. Neither Google nor Polycom shall be responsible for translated content or for the performance of the translation tool. If you require further assistance on non-translation issues, please contact Polycom support.

Translated documents are not available in PDF format.