Current Publication | x
Close

VPN Tunnel Settings

The Polycom ® RealPresence ® DMA ®  system supports VPN tunneling to other RealPresence DMA systems through the use of OpenVPN.

Once you configure a VPN tunnel, all communication goes through the tunnel. If the tunnel goes down, no communication can occur until you disable or delete the VPN tunnel on both edge-configured RealPresence DMA systems. When the tunnel is disabled or deleted, communication can resume via the typical channels.

Use of a VPN tunnel will decrease overall call capacity from approximately 1000 concurrent calls to approximately 500 concurrent calls, depending on call settings and use.

Note that when you create a VPN tunnel between your RealPresence DMA edge systems, you need to set up access proxy settings that enable the VPN tunnel to support provisioning. See Enable Endpoint Provisioning Through a VPN Tunnel .

Related Topics

Machine Translation

You are cautioned that the translation of this document is generated by a machine; therefore, the translated document may have errors and be inconsistent with the original English language version of the document.

The English language version of this document shall be considered the governing document related to the Polycom product.

If there is any contradiction between the English language version of the document and the translated version of the document, the English language version of the document shall take precedence.

The translation is provided for your convenience only. Neither Google nor Polycom shall be responsible for translated content or for the performance of the translation tool. If you require further assistance on non-translation issues, please contact Polycom support.

Translated documents are not available in PDF format.