Current Publication | x

Initial System Configuration

This section describes the configuration tasks required to complete your implementation of a new Polycom® RealPresence® DMA® system once installation and initial network configuration are complete.

This section assumes you’ve completed the configuration procedures in the Getting Started Guide (available at, logged in to the Polycom RealPresence DMA system’s management interface, and verified that the Supercluster Status pane of the Dashboard shows two servers in the cluster (for a two-server configuration), with enterprise and private network status for both.

The following topics outline the configuration tasks that are generally required. If you want to complete other optional configuration tasks, refer to the appropriate section in the documentation or online help.

DNS Records for the Polycom RealPresence DMA System

License the Polycom RealPresence DMA System

Set Up Signaling

Configure the Call Server and Optionally Create a Supercluster

Set Up Security

Set Up MCUs

Connect to Microsoft Active Directory®

Set Up Conference Templates 

Test the System

Related Topics

Machine Translation

You are cautioned that the translation of this document is generated by a machine; therefore, the translated document may have errors and be inconsistent with the original English language version of the document.

The English language version of this document shall be considered the governing document related to the Polycom product.

If there is any contradiction between the English language version of the document and the translated version of the document, the English language version of the document shall take precedence.

The translation is provided for your convenience only. Neither Google nor Polycom shall be responsible for translated content or for the performance of the translation tool. If you require further assistance on non-translation issues, please contact Polycom support.

Translated documents are not available in PDF format.