Connect to the Camera Web Interface

To connect to the web interface for the EagleEye Director II camera for the first time, you must complete a few configuration steps.


  • Discover the camera IP address using the EagleEye Director II App.
  • To cascade two cameras using a direct Ethernet cable connection, WiFi must be enabled for web interface access.


  1. Power on the EagleEye Director II camera.
  2. In a web browser, enter the camera’s IP address that you discovered using the EagleEye Director II App.
  3. Enter the username admin with the default password (last six digits of the camera’s serial number).
    Polycom recommends that you change your password from the default for security reasons.
  4. Select Login.
    If this is the first time you have accessed the web interface, you must select a region.