Set Up a Network Connection with 802.1x Authentication

If you need the EagleEye Director II camera to access a network that requires 802.1x authentication, you must configure settings in the camera web interface.

Prerequisite

  • Discover the EagleEye Director II camera IP address using the EagleEye Director II App.
  • Use an Ethernet cable to connect the camera to your local computer.

Procedure

  1. In the camera’s web interface, select Network Settings > Ethernet.
  2. At 802.1x, select Enable.
  3. At Identity, enter a name that identifies this setting.
  4. At Password, enter a password.
  5. Go to General Settings > Device Name.
  6. If you have not entered a device name, do it now.
  7. Log out of the web interface.