Enable WiFi

To cascade two cameras using a direct Ethernet cable connection, enable WiFi for web interface access.

Prerequisite

  • Discover the camera IP address using the EagleEye Director II App.
  • Use an Ethernet cable to connect the camera to your local computer.

Procedure

  1. In the camera web interface, select Network Settings > WiFi and select Enable WiFi.
  2. Enter the user name and password for authentication.
  3. Use the EagleEye Director II App to discover the WiFi address for the new connection.
    If the WiFi address is not found, WiFi authentication might have failed. Repeat the previous steps.