Configure Local Access

You can configure local access so that users can reach a RealPresence ITP system through the local interface.

Procedure

  1. Go to Admin Settings > Security > Local Accounts > Login Credentials.
  2. Configure the following settings for each system in your RealPresence ITP setup.
    Table 1. Login Credentials

    Setting

    Description

    Admin ID

    Specifies the ID for the administrator account. The default Admin ID is admin.

    Admin IDs are not case sensitive.

    Admin Room Password

    Specifies the password for the local administrator account used when logging in to the system locally.

    When this password is set, you must enter it to configure the system Admin Settings using the remote control. The password cannot contain spaces or be more than 40 characters. Passwords are case sensitive.

    The default Admin Room Password is the 14-digit system serial number from the System Information screen or the back of the system.

    Use Room Password for Remote Access

    Specifies whether the room password used for local login is also used for the remote login. When this setting is disabled, the remote access password settings are displayed.

    Admin Remote Access Password

    Specifies the password for the local administrator account used when logging in to the system remotely using the web interface or a telnet session.

    When this password is set, you must enter it to update the software or manage the system from a computer. The password cannot contain spaces or more than 40 characters.

    Require User Login for System Access

    Not Supported

    User ID

    Not Supported

    User Room Password

    Not Supported

    User Remote Access Password

    Not Supported