Change the IP Address of the Secondary Codecs

Follow these procedures to change the IP address of the Secondary codecs.


  1. In the secondary codec web UI, go to Admin Settings > Network > LAN Properties for the secondary codec.
  2. In the IP Address (IPv4) section, in the IP Address field, specify how the system obtains an IP address.
    • Obtain IP Address Automatically—Select this option if the system gets an IP address from the DHCP server on the LAN.

    • Enter IP Address Manually—Select this option if the IP address will not be assigned automatically.

      1. For the manual IP address option, enter the new information in the Your IP Address is, Default Gateway, and Subnet Mask fields.

      2. Save the changes.

  3. Go to Admin Settings > Immersive for the primary codec.
  4. Select the RealPresence Immersive Studio, or RealPresence OTX Studio for the System Type.
  5. Select the Polycom Speakers, or Legacy Speakers for the Speaker Type.
  6. In the Left Static IP Address or Right Static IP Address field, enter the updated IP address for the applicable secondary codec.
  7. Enter Admin ID and Password credentials if you use them.
  8. Select Connect.

    All codecs reboot.