Room Control Devices

Control of the room features is built into the RealPresence ITP system, eliminating the need for an external control system.


  1. Go to Admin Settings > Room Control Devices.
  2. Select the device for which you want to see the settings.

    The settings for each device are described below.

    Table 1. Room Device Settings




    Specifies the state of the connection. The states are Connected, Not Connected, and Unknown.

    IP Address

    Specifies the IP address and port number required for the primary codec to connect to the device.

    Port Number

    Specifies the port number for TCPIP connection of the device that is being controlled.