Power On the Device

You need to connect all of the related equipment that you intend to use before connecting the power source to the Pano device.


  1. Connect the Pano device to the monitor using an HDMI cable.
  2. Optional: Connect the touch-capable monitor to the bottom USB port.
  3. Connect the LAN cable.
    Note: You might experience a low signal strength when connecting the device with a LAN cable longer than 30 m (100 ft). Polycom recommends that you use an externally powered Ethernet hub or PoE switch to limit the LAN cable length to shorter than 30 m (100 ft).
  4. Connect the power source.
    The device is considered on.