Mount the System on a Monitor

You can mount the Pano system on the back of a monitor.

Prerequisite

Before you begin, make sure all cables are disconnected from the system.
The Pano system mounting kit includes a mounting plate with 50 mm, 75 mm, and 100 mm VESA Mounting Interface Standard (MIS) hole patterns. If your monitor has a different VESA hole pattern, you may be able use a VESA adapter plate (refer to the manufacturer’s documentation).
image text

Procedure

  1. Attach the two shoulder screws from the mounting kit to the bottom of the system.
  2. Using the four 4.5 mm screws included in the mounting kit, attach the mounting plate to the back of the monitor.
  3. With the back panel facing up, insert the heads of the two shoulder screws on the system into the corresponding holes on the mounting plate. Then, gently push the system down until you hear a lock that indicates the device is secure.
  4. Connect the cables and position them away from foot traffic to prevent accidental disconnections or damage.