Set the Date and Time

You can change the time settings in the Pano system web interface.

Procedure

  1. In the system web interface, go to General Settings > Date and Time.
  2. Configure the following settings:
    Setting Description
    Date Format Specifies how the date displays in the interface.
    Time Format Specifies how the time displays in the interface.
    Auto Adjust for Daylight Saving Time Specifies the daylight saving time setting. When you enable this setting, the system clock automatically changes for daylight saving time.
    Time Zone Specifies the time difference between GMT and your location.
    Time Server Specifies whether the connection to a time server is automatic or manual for system time settings. You can also select Off to manually enter the date and time.
    Primary Time Server Address Specifies the address of the primary time server to use when Time Server is set to Manual.
    Secondary Time Server Address Specifies the address of the time server to use when the Primary Time Server Address does not respond. This is an optional field.
    Current Date and Current Time If Time Server is set to Manual or Auto, the system doesn’t display these settings.

    If Time Server is set to Off, Current Date and Current Time are configurable.