Complete the Three-Monitor Setup

The following instructions describe how to connect your Pano system, Polycom video system, and three monitors.

Procedure

  1. Make sure the Pano system is running the latest software.
  2. Set the HDMI splitter to Scaler.
  3. Connect one end of an HDMI cable to the splitter.
  4. Connect the other end of the HDMI cable to the HDMI Output port on the Pano system, shown in the following figure:
    Pano System HDMI Out

  5. Connect one end of an HDMI cable to HDMI 1 on the splitter.
  6. Connect the other end of the HDMI cable to the HDMI Input port on the Pano system monitor.
  7. Configure your Pano system monitor settings:
    1. Open a browser and enter the IP address of the Pano system.
    2. Go to General Settings > Monitor.
    3. Select Automatic for the Configure Monitor option.
      Note: If you instead choose to manually configure your monitor, make sure it supports your selected resolution. An unsupported resolution can cause display issues.
    Your changes automatically save and the monitor adjusts to the configured resolution.
  8. Connect one end of an HDMI cable to the Polycom video system HDMI Input port (see images below for port location). (For RealPresence Group 700 systems, you must connect the HDMI cable to Input port 3.)
    image text
  9. Connect the other end of the HDMI cable to an output port on the splitter
    The Pano system starts presenting on the Polycom video system once the systems and monitors are connected. You must continue with the following steps to pair the systems and complete the setup process.
  10. In the system web interface, go to General Settings > Pairing.
  11. Enter the IP Address, Admin User Name, and Admin User Password that are associated with the Polycom video system. (If no password is set, leave the password field blank.)
  12. Select Connect, then Pair.
    The Pair button displays only when the connection in the previous step is successful.
  13. Test that content sharing functions properly.