Access the System Web Interface

You can access the Pano system web interface.


You must use a supported web browser with cookies enabled to access the system web interface.
Note: If you try to access the system with a web browser with cookies disabled, the system displays a notification. However, this message doesn’t appear with Microsoft Edge web browsers.

If you enable the Secondary network (Wi-Fi) by selecting the Enable Administrator Access to This Network option, you can also access the system web interface using the Wi-Fi network IP address.


You can always access the system web interface using the Primary network (LAN) IP address.


  1. Open a browser and enter the system IP address using the format
    Note: HTTPS severely limits the ability of anyone on the network to discover login information or credentials. For this reason, the system redirects attempts to use the system web interface via HTTP to the HTTPS interface.
  2. Enter your administrator credentials.
    The default Administrator user name is admin, and the default admin password is the last six digits of the Pano device serial number. You can find the serial number in one of these locations:
    • A sticker on the back of the device
    • The shipping container
    • The Dashboard screen of the system web interface
  3. Select Login.