Using Dual Pano

You can deploy two Pano devices, one Pano device on the Primary network (LAN) and one on the Secondary network (Wi-Fi).


Polycom Pano solution overview - dual Pano

Use this deployment if you need to maintain physical separation of the networks.

Note the following:
  • You can use the HDMI interface to connect monitors to the Pano device directly, or daisy chain it from one Pano to another monitor.
  • You can use a different monitor input. Switching from one input to another input on the display must be done manually.
  • You may need to separate the management traffic to allow this traffic from the corresponding networks.
  • Network configurations could be any of the previous options that meet the security requirements for the particular customer deployment.