Join a Wi-Fi Network

You can connect the Polycom Studio USB device to Wi-Fi through Polycom Companion.

Procedure

  1. Connect the Polycom Studio USB device to your computer, then select the Polycom Studio tile from your Polycom Companion.
  2. Go to Admin Settings > Wi-Fi Settings.
  3. Select On in Wi-Fi Status to enable the Polycom Studio Wi-Fi function.
    After you connect to a Wi-Fi network, connection status icon changes to .
  4. Do one of the following:
    • Select a network from Wi-Fi Name. The app lists networks in order of signal strength.
    • Select Autoconnect to connect to the specified Wi-Fi network automatically when it’s available.
    • Select Join Other Network and specify the network name manually in the SSID field.

    Selecting a new SSID erases the previous SSID and relevant Wi-Fi settings from the system.

  5. Configure the following Wi-Fi settings. Available settings vary with your selections.
    Setting Description
    Security

    Specifies the encryption protocol:

    • None
    • WEP
    • WPA/WPA2/FT PSK
    • 802.1x EAP
    EAP Method

    Specifies the EAP for WPA-Enterprise (802.1xEAP):

    • PEAP
    • TLS
    • TTLS
    • PWD
    Phase 2 Authentication

    Specifies the phase 2 authentication method. Available options vary with the selected EAP method.

    • None
    • MSCHAP
    • MSCHAPV2
    • GTC
    • PAP
    CA Certificate

    Specifies the CA certificate:

    • <InstalledCAName>— Selects from installed CA list.
    • Do not validate
    User Certificate Selects from the Installed User CA Name list.
    Identify Specifies your identity.
    Anonymous Identify Specifies an anonymous identity to protect your real identity.
    Password Specifies the login password.
    Show password Selects the check box to reveal your password instead of dots.
    Show advanced settings Selects the check box to configure IP settings.
    IP Setting

    Specifies one method to set your network IP address:

    • Static: specifies the IP settings manually.
    • DHCP: obtains the IP settings automatically.
    IP Address Specifies the IP address of the network.
    Gateway Specifies the gateway of the network.
    Subnet Mask Specifies the network mask address for the network.
    DNS Address 1 Specifies the DNS server address of the network.
    DNS Address 2 Specifies the alternate DNS server address of the network.
  6. Click Join to connect to the Wi-Fi network.