Set the Date and Time

Change the date and time settings in the system web interface.

Procedure

  1. In the system web interface, go to General Settings > Date and Time.
  2. Configure the following settings (your changes save automatically):
    Setting Description
    Date Format Specifies how the date displays.
    Time Format Specifies how the time displays.
    Auto Adjust for Daylight Saving Time When enabled, the system clock automatically adjusts for daylight saving time.
    Time Zone Specifies the time difference between GMT and your location.
    Time Server Specifies if you want to automatically or manually configure the system to use a time server. You can also select Off to manually enter the date and time.
    Primary Time Server Address Specifies the address of the primary time server your system uses when you set Time Server to Manual.
    Secondary Time Server Address Specifies the address of the time server your system uses when the Primary Time Server Address doesn’t respond. This is an optional field.
    Current Date and Current Time If you set Time Server to Manual or Auto, the system doesn’t display these settings.

    If you set Time Server to Off, you can configure Current Date and Current Time.