Check Provisioning Results

To verify your settings are provisioned the way you want, you can see if the configuration parameters were applied successfully to your system.


Make sure your system is registered with a provisioning service, such as RealPresence Resource Manager.


  1. In the system web interface, go to Servers > Provisioning Server.
  2. Select Show Results and verify if parameters applied successfully the last time you provisioned your system.
    The Result column displays one of the following statuses:
    • SUCCESS: The parameter was applied.
    • IGNORED: The parameter didn’t apply because a configuration that controls this feature is disabled, not applicable, or wasn’t provisioned.
    • FAILURE: If you see this, the Error Message column can help you identify the issue.
For a list of available system parameters and their permitted values, see the Poly VideoOS Configuration Parameters Reference Guide .