Register the System with Poly Lens Provisioning Service

Before you can provision a system, you must register it with Poly Lens.


For information on how to provision your system with Poly Lens, see the Poly Lens Documentation .


  1. In the system web interface, go to Servers > Provisioning Server.
  2. Select Enable Provisioning.
  3. In the Server Type field, select Poly Cloud.
  4. Select Load Discovered Information.
    The registration fields update automatically if your system detects a provisioning server.
  5. Optional: If your system didn’t detect a provisioning server, complete the following fields (contact your network administrator for help):
    Setting Description
    Server Address Address of the system running the provisioning service.
    User Name User ID for registering with the provisioning service.
    Password Password for registering with the provisioning service.
  6. Select Save.
  7. Verify that Registration Status changes from Pending to Registered.
    It might take a minute or two for the status to change.