Content

This section describes available cloud configuration parameters. Included are permitted values and, if applicable, guidance for configuring related parameters.

Content Parameters

Use the following parameters to configure content sharing settings on your system.

bluetooth.enable

Turns system Bluetooth features on or off.

Disabling Bluetooth turns off screen mirroring with AirPlay-certified devices and prevents those devices and the Polycom Content App from automatically discovering your system. (You can still connect with the Polycom Content App using the system IP address.)

You can’t provision this parameter if the system is in Partner Mode.

True (default)

False

content.airplay.enable

Enables or disables screen mirroring with AirPlay-certified devices.

You can’t provision this parameter if the system is in Partner Mode.

True (default)

False

content.conference.qualityPreference

Specifies which video stream has precedence when attempting to compensate for network loss.

The selected stream experiences less quality degradation during network loss compensation than the other. Choosing Both streams means that each experiences roughly equal degradation.

You don't need to set this parameter if content.conference.autoAdjustBandwidth="True".

You can’t provision this parameter if the system is in Partner Mode.

Both

People

Content

content.miracast.enable

Enables or disables screen mirroring with Miracast-certified devices.

You can’t provision this parameter if the system is in Partner Mode.

True (default)

False

content.miracast.operatingchannel

Sets the operating channel used for connections between the system and Miracast-certified devices. Available channels are within 2.4 and 5 GHz signal ranges.

You can’t provision this parameter if the system is in Partner Mode.

You can also let the system choose an operating channel for you by only configuring the device.local.country parameter. If you don’t set content.miracast.operatingchannel or device.local.country, the system selects a random operating channel in the 2.4 GHz signal range.

Available 2.4 GHz channels: 1-11

Available 5 GHz channels: 36, 40, 44, and 48

Remember the following when selecting an operating channel:

  • To avoid content quality issues (such as latency or packet loss), select the same operating channel configured on your wireless access point (WAP).
  • If your WAP simultaneously broadcasts 2.4 and 5 GHz channels, select a 5 GHz channel since many devices choose the faster connection if the signals have similar strength.
  • You can’t change the operating channel during an ongoing content mirroring session.

The listening channel, which is used by the system to advertise it can connect with nearby Miracast-certified devices, is selected automatically in the 2.4 GHz signal range. You can’t configure the listening channel.

device.net.contentSave.enable

Allows or denies users the ability to save content using the Polycom Content App when connected to the system through your primary network (i.e., LAN).

True (default)

False

device.net.secondaryNetwork.contentSave.enable

Allows or denies users the ability to save content using the Polycom Content App when connected to the system through your Wi-Fi network.

False (default)

True