Peripheral Devices

This section describes available peripheral device configuration parameters. Included are permitted values and, if applicable, guidance for configuring related parameters.

Peripheral Device Pairing Parameter

Use the following parameter to automatically pair some devices with your system.

mr.primary.autoPair.enable

Enables your system to automatically pair with some devices, such as a Poly IP Table Microphone.

For example, if mr.primary.autoPair.enable="True" and you connect a table microphone to a LAN port on your system, it should automatically pair and be ready to use.

You can’t provision this parameter if the system is in Partner Mode.

True (default)

False

Poly IP Table and Ceiling Microphone Parameters

Use the following parameters to configure Poly IP Table Microphones and Poly IP Ceiling Microphones connected to your system.

log.level.change.xxx
Controls the logging detail level. These are the input filters into the internal memory-based log system.

Possible values for xxx are cfg, curl, mr, so, ss, ssps, and usb.

0-6 (default is 4)

log.render.level
Controls the logging level for the lowest severity of events to log.

For example, if you configure this parameter to "2", the log includes all events of an equal or greater severity level.

0 or 1 - Severity Debug (7)

2 or 3 - Severity Informational (6)

4 Severity Error (3)

5 Severity Critical (2)

6 Severity Emergency (0)

0-6 (default is 1)

log.render.stdout
Enables or disables the logs print to standard out (serial and shell terminal).

False (default)

True

mr.pair.tls.enabled
Enables or disables TLS between paired devices.

True (default)

False

device.net.mikoTimeout.set
Allows you to set the device.net.mikoTime parameter.

False (default)

True

device.net.mikoTimeout
Timeout value for table microphone DHCP in seconds.

30-60 (default is 30)

feature.usbdevice.enable
Enables or disables USB device access.

True (default)

False

Poly Microphone IP Adapter Parameters

Use the following parameters to configure the Poly Microphone IP Adapter to your system.

device.syslog.renderLevel

Controls the logging details level.

Debug (default)

Info

Warning

Error

Critical

call.encryption.requireAES

Controls when to use the audio encryption.

You can’t provision this parameter if the system is in Partner Mode.

Off

When_Available (default)

Required_Video

Required_All

sec.TLS.disableVersion1

Enables or disables TLS1.0.

True

False (default)

device.local.deviceName

The name of your system.

String