Software Update

This section describes available software update configuration parameters for your system. Included are permitted values and, if applicable, guidance for configuring related parameters.

When you update your system, you also update some of its paired devices (if those devices have a new version available). Depending on your setup, these devices might include:

  • Poly TC8 device
  • Poly IP Table Microphone
  • Poly IP Ceiling Microphone
  • Poly Microphone IP Adapter
  • Poly EagleEye Cube USB camera

Software Update Parameters

Use the following parameters to configure software update settings on your system.

upgrade.auto.enable

Controls whether the software of your system and its connected peripheral devices automatically updates.

False (Teams and Zoom default)

True (All other conferencing providers default)

upgrade.auto.timeFrame.enable

If you've configured automatic software updates (upgrade.auto.enable="True"), you can restrict those updates to occur only during a maintenance window.

If set to "True", make sure you also configure upgrade.auto.timeFrame.startTime and upgrade.auto.timeFrame.stopTime.

False (Teams and Zoom default)

True (All other conferencing providers default)

upgrade.auto.timeFrame.startTime

Specifies when the maintenance window starts. Set a value using 24-hour clock format (HH:MM). For example, "23:30" is an acceptable value.

String

01:00 (default)

upgrade.auto.timeFrame.stopTime

Specifies when the maintenance window ends. Set a value using 24-hour clock format (HH:MM). For example, "05:30" is an acceptable value.

String

05:00 (default)

upgrade.auto.polling.interval

If you've configured automatic software updates (upgrade.auto.enable="True"), you can specify how often (in seconds) your system checks with RealPresence Resource Manager to see if there's a new update to download. The default value "3600" means your system checks for updates once every hour.

Doing either of the following turns this feature off:

Disable provisioning (you can do this only in the system web interface).

Enable an automatic update maintenance window by setting upgrade.auto.timeFrame.enable="True". (The maintenance window takes priority over automatic polling.)

Integer > 300

3600 (default)