Serial Port Hardware

This section describes available configuration parameters for your system’s serial port. Included are permitted values and, if applicable, guidance for configuring related parameters.

Serial Port Hardware Parameters

Use the following parameters to configure serial port settings on your system.

device.serial.mode

Specifies the mode used for the RS-232 serial port.

Control (default) - Receives control signals from a touch-panel control. Allows any device connected to the RS-232 port to control the system using API commands.

Off - Disables the serial port.

device.serial.baud

Set this to the same value configured on the serial device.

9600 (default)

19200

38400

57600

115200

device.serial.flowControl

Specifies if you want to use hardware flow control between the connected device and your system.

none (default)

hardware

device.serial.parity

Set this to the same value configured on the serial device.

none (default)

even

odd

device.serial.stopBits

Set this to the same value configured on the serial device.

1 (default)

2