Configure RealPresence Resource Manager Portal as a Next Hop

You need to add the RealPresence Resource Manager Portal as a next hop before you can configure an HTTP tunnel proxy.

Procedure

  1. Go to Service Config > Access Proxy Settings.
  2. Do one of the following:
    • Click Add HTTPS Proxy to add a new HTTPS proxy.
    • Select an existing HTTPS proxy and click Edit.
  3. Under Next Hops, click Add.
  4. Configure the settings as described in the following table:
    Field Description
    Type Request-URI or Host header
    Name The unique name of this next hop.
    System

    For Request-URI next hop only.

    Polycom Management System or Polycom Content Sharing Suite (also called Polycom ContentConnect)

    Note: Add a separate Request-URI next hop if you need to configure HTTPS settings for both systems.
    Host value

    For Host header next hop only.

    The FQDN in the request message header that identifies the resource being requested.

    IP Address The private IP address of the target HTTPS server. After accepting the HTTPS request from the external endpoint, the RealPresence DMA system sends a new HTTPS request to this IP address.
    Port The listening port of the internal application server.

    For Request URI type, us the following configuration:


    next hop configuration
  5. Click OK.