Current Publication | x
Close

System Configuration

After you have installed the Polycom® RealPresence® Access Director™ system and entered the initial network settings, you will need to configure several key system settings, as discussed in the sections that follow. Additionally, you can revise your system settings as needed after the initial configuration.

The following topics describe configuration details and indicate the recommended order for configuring system settings:

Configure Time Settings

System Licensing

Configure Network Settings

Configure Two-System Tunnel Settings (Optional)

Configure Access Proxy Settings

Configure Basic Access Control List Settings

Manage Certificates

Provision the System

Integrate with Microsoft Active Directory

Configure SIP Signaling Settings

Configure H.323 Signaling Settings

TURN Services

Configure Media Traversal Settings

Configure Federation Settings

For information on installation and initial system configuration, see the Polycom RealPresence Access Director, Appliance Edition or Virtual Edition, Getting Started Guide.

For system deployment information, see Polycom Unified Communications in RealPresence Access Director System Environments. Both documents are available at support.polycom.com.

Related Topics

Machine Translation

You are cautioned that the translation of this document is generated by a machine; therefore, the translated document may have errors and be inconsistent with the original English language version of the document.

The English language version of this document shall be considered the governing document related to the Polycom product.

If there is any contradiction between the English language version of the document and the translated version of the document, the English language version of the document shall take precedence.

The translation is provided for your convenience only. Neither Google nor Polycom shall be responsible for translated content or for the performance of the translation tool. If you require further assistance on non-translation issues, please contact Polycom support.

Translated documents are not available in PDF format.