Log On

You can use the system web interface to perform most of the calling and configuration tasks you can perform on the local system. To log on to your system's web interface, you must open a web browser and enter the system's IP address.

Login credentials are user IDs and passwords that identify the user and define the user's ability to access the system. You can configure both local and remote access for users.

The system web interface supports the most commonly used web browsers. For a list of supported browsers, refer to the Polycom RealPresence Group Series Release Notes at Polycom Support.

Note: For security purposes, Polycom recommends that you follow best practices when logging into the Polycom® RealPresence® Group Series system web interface. Use an up-to-date browser version and do not browse the internet while logged in to the system.
To configure your browser to use the system web interface, you must do the following:
  • Use a supported web browser.

  • Configure your browser to allow cookies.

Procedure

  1. In your web browser address line, enter the system's IP address, for example, "http://10.11.12.13".
  2. Enter the Admin ID as the user name (default is admin).
  3. Enter the Admin Remote Access Password, if one is set.