Configure LAN Settings

Before you can pair the Polycom Touch Control with the RealPresence Group Series system, you must configure the LAN settings.

Procedure

  1. From the Home screen, touch icon image Administration.
  2. Touch the LAN Properties tab.
  3. Configure the following IP Address (IPv4) settings.

    Setting

    Description

    Set IP Address

    Specifies how the Touch Control obtains an IP address.

    • Obtain IP address automatically—Select if the Touch Control gets an IP address from the DHCP server on the LAN.

    • Enter IP address manually—Select if the IP address is not automatically assigned.

    IP Address

    Displays the IP address currently assigned to the Touch Control, if the Touch Control obtains its IP address automatically.

    If you select Enter IP address manually, enter the IP address here.

    Subnet Mask

    Displays the subnet mask currently assigned to the Touch Control.

    If you selected Enter IP address manually, enter the subnet mask here.

    Default Gateway

    Displays the gateway currently assigned to the Touch Control.

    If you selected Enter IP address manually, enter the gateway IP address here.

  4. Configure the following DNS settings.

    Setting

    Description

    Domain Name

    Displays the domain name currently assigned to the touch control.

    If the Polycom Touch Control does not automatically obtain a domain name, enter one here.

    DNS Servers

    Displays the DNS servers currently assigned to the touch control.

    If the touch control does not automatically obtain a DNS server address, enter up to two DNS servers here.

    You can specify IPv4 DNS server addresses only when the IPv4 address is entered manually. When the IPv4 address is obtained automatically, the DNS Server addresses are also obtained automatically.

  5. View the general settings.

    Setting

    Description

    Duplex Mode

    Displays the duplex mode. Read-only.

    LAN Speed

    Displays the LAN speed. Read-only.