Configure SIP Settings (Standalone Mode Only)

To make SIP calls, you must configure SIP settings manually in standalone mode.

Note:

If you use a Polycom DMA server as the SIP server, leave the Domain field empty. If you use a third-party SIP server, enter the domain name for authentication with the registrar server.

Procedure

  1. Select .
  2. Select Settings > SIP Settings > Enable SIP Calls.
  3. To register your system to a SIP server, select SIP Registration and configure the SIP server:
    • SIP Proxy Server Enter the IP address or FQDN of the SIP proxy server.
    • Domain Enter the domain name for authentication with SIP registrar server.
    • SIP User Name Enter the user name for authentication with a registrar server.
    • Authorization Name Enter the name to use for authorization when registering with a SIP registrar server.
    • Password Enter the passcode for authentication with a registrar server.
  4. To choose a protocol for SIP signaling, select an option under Transport Protocol:
    • TCP For reliable transport.
    • UDP For best-effort transport.