Bridged Line Appearance Parameters

To begin using Bridged Line Appearance, you must get a registered address dedicated for use with your call server provider.

This dedicated address must be assigned to a phone line in the reg.x.address parameter.

Use the parameters in the following list to configure this feature.

call.shared.disableDivert

1 (default) - Enable the diversion feature for shared lines.

0 - Disable the diversion feature for shared lines. Note that this feature is disabled on most call servers.

Change causes system to restart or reboot.

reg.x.type

private (default) - Use standard call signaling.

shared - Use augment call signaling with call state subscriptions and notifications and use access control for outgoing calls.

reg.x.thirdPartyName

Null (default) - In all other cases.

string address -This field must match the reg.x.address value of the registration which makes up the part of a bridged line appearance (BLA).

divert.x.sharedDisabled

1 (default) - Disables call diversion features on shared lines.

0 - Enables call diversion features on shared lines.

Change causes system to restart or reboot.

voIpProt.SIP.blaGlareHonorRetryAfter

Controls the Retry mechanism.

1 (default) – The phone honors the Retry-after header on glare and sends NOTIFY with the same state and line-id after the requested time interval.

0 – The phone ignores the Retry-after header on glare and immediately sends NOTIFY with the next available line-id.