Camera Parameters for the Paired RealPresence Group Series System

Use the following configuration parameters to configure the video and camera options for supported cameras.

Note: The following parameters apply only to EagleEye Director II and EagleEye Producer cameras. For more camera parameters, see the Poly Trio Administrator Guide .
video.camera.x.trackingEnabled

For the EagleEye Director II or EagleEye Producer camera:

1 (default) - Enables automatic camera tracking. You can then set the tracking type, speed, and size.

0 - Disables camera tracking.

video.camera.x.trackingFramingMode

For the EagleEye Director II or EagleEye Producer camera:

0 (default) - Frame Speaker: Frames the active speaker.

1 - Frame Group: Frames the participants in the room (camera movement is seen on the far end).

2 - Frame Group with Transition (EagleEye Producer only): Frames the participants in the room (camera movement is seen on the far end).

video.camera.x.trackingSpeed

For the EagleEye Director II or EagleEye Producer camera:

1 (default) - Normal: Tracks transitions at a medium rate.

0 - Slow: Tracks transitions slowly.

2 - Fast: Tracks transitions quickly.

video.camera.x.trackingFramingSize

For the EagleEye Director II or EagleEye Producer camera:

1 - Medium (default): Average-sized frame.

0 - Wide: Most expansive frame.

2 - Tight: Close-up frame.

video.camera.x.trackingPipEnabled

For the EagleEye Director II or EagleEye Producer camera:

1 (default) - Enables People in Picture (PIP), which displays a group or room view to far-end participants.

0 - Disables PIP.