Configuring a Skype for Business Sign In Method and Credentials

The following parameters configure the type of sign in on the phones and user credentials.

Table 1. Skype for Business Sign In Method Parameters

Template

Parameter

Permitted Values

Change Causes Restart or Reboot

reg-advanced.cfg

reg.1.auth.loginCredentialType

Configure a login type and user credentials. You cannot log in to the phone with Microsoft credentials if the parameter reg.1.auth.loginCredentialType is set to the default value.

LoginCredentialNone (default)

usernameAndPassword - Set credentials to sign-in address, user name, domain, and password in the required format.

extensionAndPIN - Set credentials to extension and PIN.

No

reg-advanced.cfg

reg.1.auth.useLoginCredentials

You can use this method in the configuration file to automatically sign in users after the phone powers up.

1 (default) - SSI Login credentials, BToE Sign in, and Web Sign types are available for authentication with the server.

0 - SSI Login credentials, BToE Sign in, and Web Sign types are not available for authentication with the server.

No

reg-advanced.cfg

reg.1.auth.usePinCredentials

You can use this method in the configuration file to automatically sign in users after the phone powers up.

To use this sign-in method, you must enable DHCP Option 43 or dhcp.option43.override.stsUri.

1 (default) - PIN authentication sign in method is available for authentication on the server.

0 (default) - PIN authentication sign in method is not available for authentication on the server.

No