Configuring the Web Configuration Utility

The security update for Skype for Business includes a device parameter and a corresponding device.set parameter

Polycom recommends using device.* parameters only if you are familiar with the centralized provisioning method and with Polycom UC Software.

Use the following parameters to enable and configure the Web Configuration Utility.

Table 1. Web Configuration Utility Parameters

Template

Parameter

Permitted Values

Change Causes Restart or Reboot

device.cfg, site.cfg

device.sec.coreDumpEncryption.enabled

0 (default)

1

No

device.cfg, site.cfg

device.sec.coreDumpEncryption.enabled.set

0 (default)

1

No

lyncSharedExample.cfg, lyncSharedLCExample.cfg

httpd.cfg.enabled

Base Profile = Generic

1 (default) - The Web Configuration Utility is enabled.

0 - The Web Configuration Utility is disabled.

Base Profile = Skype, SkypeUSB

0 (default) - The Web Configuration Utility is disabled.

1 - The Web Configuration Utility is enabled.

No

lyncSharedExample.cfg, lyncSharedLCExample.cfg

httpd.cfg.secureTunnelRequired

1 (default) - Access to the Web Configuration Utility is allowed only over a secure tunnel (HTTPS) and non-secure (HTTP) is not allowed.

0 - Access to the Web Configuration Utility is allowed over both a secure tunnel (HTTPS) and non-secure (HTTP).

No

lyncSharedExample.cfg, lyncSharedLCExample.cfg

httpd.enabled

Base Profile = Generic

1 (default) - The web server is enabled.

0 - The web server is disabled.

Base Profile = Skype, SkypeUSB

0 (default) - The web server is disabled.

1 - The web server is enabled.

No