Dial Plan, Dial Plan Normalization, and Digit Map Parameters

Polycom does not support all regular expression dial plans.

The following tables list available parameters and supported and unsupported dial plans with Skype for Business Server. The tables are followed by examples of supported and unsupported dial plans.

Table 1. Dial Plan, Dial Plan Normalization, and Digit Map Parameters

Template

Parameter

Permitted Values

Change Causes Restart or Reboot

site.cfg

dialplan.1.digitmap

x.T

No

site.cfg

dialplan.1.digitmap.timeOut

Specify a timeout in seconds for each segment of digit map. After you press a key, the phone waits the number of seconds you specify to match the digits to a dial plan and dial the call.

4 seconds (default)

string of positive integers separated by | for example 3 | 3 | 3 | 3 | 3 | 3

Note: If there are more digit maps than timeout values, the default value is used. If there are more timeout values than digit maps, the extra timeout values are ignored.

No

site.cfg

dialplan.1.lyncDigitmap.timeOut

This parameter applies to lines registered with Skype for Business or Lync Server.

Specify a timeout in seconds for each segment of a digit map. After you press a key, the phone waits the number of seconds you specify to match the digits to a dial plan and dial the call.

4 seconds (default)

0 to 99 seconds

Note: If there are more digit maps than timeout values, the default value is used. If there are more timeout values than digit maps, the extra timeout values are ignored.

Note also that if you configure a value outside of the permitted range, the default value is used.

No

site.cfg

dialplan.userDial.timeOut

Specify the time in seconds that the phone waits before dialing a number you enter while the phone is on hook. This parameter applies only when its value is lower than up.IdleTimeOut .

4 seconds (default)

0 to 99 seconds

No

sip-interop.cfg

reg.1.applyServerDigitMapLocally

Skype Base Profile: 1(default)

Generic Base Profile: 0 (default)

1 - Enable dial plan normalization. Dial plan normalization rules are downloaded from the Microsoft Server and processed on the phone.

0 - Disable dial plan normalization. Dial plan rules are processed by the Microsoft Server.

No

sip-interop.cfg

up.IdleTimeOut

Set the number of seconds that the phone is idle for before automatically leaving a menu and showing the idle display.

During a call, the phone returns to the Call screen after the idle timeout.

40 seconds (default)

0 to 65535 seconds

Yes