Hybrid Line Registration Parameters

The following tables lists the parameters to configure dial plan and line switching for Hybrid Registration.

Table 1. Dial Plan and Digit Map Parameters for Hybrid Registrations

Template

Parameter

Permitted Values

Change Causes Restart or Reboot

site.cfg

dialplan.digitmap.lineSwitching.enable

0 (default) - Disable the line switching in dial plan to switch the call to the dial plan matched line.

1 - Enable the line switching in dial plan to switch the call to the dial plan matched line.

This is not applicable for off-hook dialing.

No

reg.cfg

reg.limit

Specify the maximum number of lines to use for registration.

1 (default)

12 maximum (1-3 supported)

No

sip-interop.cfg

reg.1.mergeServerDigitMapLocally

1 (default) - Allows the dialplans from dialplan.1.digitmap to append on top of the dialplans received from the server.

0 - Does not allow the dial plans from dialplan.1.digitmap to append on top of the dialplans received from the server.

No