HTTPD Web Server Parameters

The phone contains a local Web Configuration Utility server for user and administrator features.

Note that several of these parameters can be used with Microsoft Skype for Business Server and the parameter values listed in the table Enable Web Configuration Utility have two default states: a generic default value for UC Software 5.1.0 and a different value when the phone is registered with Skype for Business Server. The following table lists the default values for both states where applicable.

The web server supports both basic and digest authentication. The authentication user name and password are not configurable for this release.

Table 1. HTTPD Web Server Parameters

Template

Parameter

Permitted Values

Change Causes

Restart or Reboot

site.cfg

httpd.enabled

Base Profile = Generic

1 (default) - The web server is enabled.

0 - The web server is disabled.

Base Profile = Skype

0 (default) - The web server is disabled.

1 - The web server is enabled.

Yes

site.cfg

httpd.cfg.enabled

Base Profile = Generic

1 (default) - The Web Configuration Utility is enabled.

0 - The Web Configuration Utility is disabled.

Base Profile = Skype

0 (default) - The Web Configuration Utility is disabled.

1 - The Web Configuration Utility is enabled.

Yes

site.cfg

httpd.cfg.port

Port is 80 for HTTP servers. Take care when choosing an alternate port.

80 (default)

1 to 65535

Yes

site.cfg

httpd.cfg.secureTunnelPort

The port to use for communications when the secure tunnel is used.

443 (default)

1 to 65535

Yes

site.cfg

httpd.cfg.secureTunnelRequired

1 (default) - Access to the Web Configuration Utility is allowed only over a secure tunnel (HTTPS) and non-secure (HTTP) is not allowed.

0 - Access to the Web Configuration Utility is allowed over both a secure tunnel (HTTPS) and non-secure (HTTP).

Yes