Per-Registration Dial Plan Parameters

All of the parameters listed in the following table are per-registration parameters that you can configure instead of the general equivalent dial plan parameters.

Note that the per-registration parameters override the general parameters where x is the registration number, for example, dialplan.x.applyToTelUriDial overrides dialplan.applyToTelUriDial for registration x.

The maximum number of registrations (x) for each phone model is listed in the table Flexible Call Appearances under the column Registrations.

Table 1. Per-Registration Dial Plan (Digit Map) Parameters

Template

Parameter

Permitted Values

Change Causes

Restart or Reboot

site.cfg

dialplan.userDial.timeOut

Specify the time in seconds that the phone waits before dialing a number entered while the phone is on hook.

Generic Base Profile (default) – 0

Lync Base Profile (default) – 4

0-99 seconds

0-99 seconds

You can apply dialplan.userDial.timeOut only when its value is lower than up.IdleTimeOut .

No

site.cfg

dialplan.x.applyToCallListDial

Generic Base Profile (default) – 1

Lync Base Profile (default) – 0

0 - The dial plan does not apply to numbers dialed from the received call list or missed call list, including sub-menus for this line.

1 - The dial plan applies to numbers dialed from the received call list or missed call list, including sub-menus for this line.

Yes

site.cfg

dialplan.x.applyToDirectoryDial

Generic Base Profile (default) – 1

Lync Base Profile (default) – 0

0 - The dial plan is not applied to numbers dialed from the directory or speed dial, including auto-call contact numbers for this line.

1 - The dial plan is applied to numbers dialed from the directory or speed dial, including auto-call contact numbers for this line.

Yes

site.cfg

dialplan.x.applyToForward

Generic Base Profile (default) – 1

Lync Base Profile (default) – 0

0 - The dial plan applies to forwarded calls for this line.

1 - The dial plan applies to forwarded calls for this line.

No

site.cfg

dialplan.x.applyToTelUriDial

0

1 (default)

Yes

site.cfg

dialplan.x.applyToUserDial

0

1 (default)

Yes

site.cfg

dialplan.x.applyToUserSend

0

1 (default)

Yes

site.cfg

dialplan.x.conflictMatchHandling

0 (default for Generic Profile)

1 (default for Skype Profile)

No

site.cfg

dialplan.x.digitmap.timeOut

Generic Base Profile (default) – 0

Lync Base Profile (default) – 4

Yes

site.cfg

dialplan.x.digitmap

Generic Base Profile (default) - Null

Lync Base Profile (default) - 4

string - max number of characters 100

Yes

site.cfg

dialplan.x.e911dialmask

Null (default)

string - max number of characters 256

No

site.cfg

dialplan.x.e911dialstring

Null (default)

string - max number of characters 256

No

site.cfg

dialplan.x.impossibleMatchHandling

0 (default) - Digits are sent to the call server immediately.

1 - A reorder tone is played and the call is canceled.

2 - No digits are sent to the call server until the Send or Dial key is pressed.

3 - No digits are sent to the call server until the Timeout configured by dialplan.userDial.timeOut .

Yes

site.cfg

dialplan.x.originaldigitmap

Null (default)

string - max number of characters 2560

No

site.cfg

dialplan.x.removeEndOfDial

0

1 (default)

Yes

site.cfg

dialplan.x.routing.emergency.y.server.z

0 (default)

1

2

3

x, y, and z = 1 to 3

Yes

site.cfg

dialplan.x.routing.emergency.y.value

Null (default)

string - max number of characters 64

Yes

site.cfg

dialplan.x.routing.server.y.address

Null (default)

string - max number of characters 256

Yes

site.cfg

dialplan.x.routing.server.y.port

5060 (default)

1 to 65535

Yes

site.cfg

dialplan.x.routing.server.y.transport

DNSnaptr (default)

TCPpreferred

UDPOnly

TLS

TCPOnly

Yes