Wireless Network Parameters

The following table lists the parameters to configure your wireless network.
Table 1. Wireless Network Parameters
Template Parameter Permitted Values Change Causes Restart or Reboot
device.cfg, wireless.cfg device.wifi.enabled

0 (default) - Disable the wireless interface.

1 - Enable the wireless interface.

Yes
device.cfg, wireless.cfg device.wifi.dhcpEnabled

0 (default) - Disable DHCP on the wireless interface.

1 - Enable DHCP on the wireless interface.

Yes
device.cfg, debug.cfg device.wifi.ipAddress

Set the network address of the wireless device if not using DHCP.

0 to 255 characters.

No
device.cfg, site.cfg device.wifi.subnetMask

Set the network mask address of the wireless device if not using DHCP.

0 to 255 characters.

No
device.cfg, site.cfg device.wifi.ipGateway

Set the IP gateway address for the wireless device if not using DHCP.

0 to 255 characters.

No
device.cfg, wireless.cfg device.wifi.ssid

Set the SSID of the wireless network.

0 to 32 characters.

No
device.cfg, wireless.cfg device.wifi.securityMode

Set the wireless security mode.

Open

WPA-PSK

WPA(2)-PSK

WPA2-Enterprise

No
device.cfg, wireless.cfg device.wifi.psk.keyType

Set the Pre-Shared Key (PSK) type

0 (default) - Passphrase.

1 - Hexadecimal key.

No
device.cfg, wireless.cfg device.wifi.psk.key

Set the Pre-Shared Key.

0 to 128 characters.

No
device.cfg, wireless.cfg device.wifi.wpa2Ent.method

Set the EAP type used for 802.1x authentication.

PEAPv0/MSCHAPv2 (default)

TLS

FAST

The security profile for PEAPv0/MSCHAPv2, TLS is device.sec.TLS.profileSelection.dot1x

No
device.cfg, wireless.cfg device.wifi.wpa2Ent.user

Set the WPA2-Enterprise Security user name.

0 to 128 characters.

No
device.cfg, wireless.cfg device.wifi.wpa2Ent.password

Set the WPA2-Enterprise Security password.

0 to 128 characters.

No
device.cfg, wireless.cfg device.wifi.wpa2Ent.anonid

EAP-FAST only. Set the anonymous identity (user name) for 802.1x authentication.

0 to 128 characters.

No
device.cfg, wireless.cfg device.wifi.wpa2Ent.eapFast.inBandProv

0 (default) - Disable in-band provisioning.

1 - Enable in-band provisioning.

No
device.cfg, wireless.cfg device.wifi.radio.regulatoryDomain

Set the regulatory domain to appropriate value for your location.

0 (default) - Global.

1 - US

2 - EU

No
device.cfg, wireless.cfg device.wifi.radio.band2_4GHz.enable

1 (default) - Enable the 2.4 GHz wireless band.

0 - Disable the 2.4 GHz wireless band.

No
device.cfg, wireless.cfg device.wifi.radio.band5GHz.enable

0 (default) - Disable the 5 GHz wireless band.

1 - Enable the 5 GHz wireless band.

No