EEE 802.1p/Q Parameters

Use the following table to set values for IEEE 802.

1p/Q parameters. You can configure the user_priority specifically for RTP and call control packets, such as SIP signaling packets, with default settings configurable for all other packets.

The phone tags all Ethernet packets it transmits with an 802.1Q VLAN header when the following occurs:
  • A valid VLAN ID specified in the phone's network configuration.
  • The phone is instructed to tag packets through Cisco Discovery Protocol (CDP) running on a connected Ethernet switch.
  • A VLAN ID is obtained from DHCP or CDP.
    Table 1. IEEE 802.1p/Q Parameters

    Template

    Parameter

    Permitted Values

    Change Causes

    Restart or Reboot

    site.cfg

    qos.ethernet.other.user_priority

    Set user priority for packets without a per-protocol setting.

    2 (Default)

    0 - 7

    No

    site.cfg

    qos.ethernet.rtp.video.user_priority

    Set user-priority used for Video RTP packets.

    5 (Default)

    0 - 7

    No

    site.cfg

    qos.ethernet.rtp.user_priority

    Choose the priority of voice Real-Time Protocol (RTP) packets.

    5 (Default)

    0 - 7

    No

    site.cfg

    qos.ethernet.callControl.user_priority

    Set the user-priority used for call control packets.

    5 (Default)

    0 - 7

    No